### This file is automatically generated by modules-update # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modules.d and read # the manpage for modules-update. # ### modules-update: start processing /etc/modules.d/aliases # Aliases to tell insmod/modprobe which modules to use # Uncomment the network protocols you don't want loaded: # alias net-pf-1 off # Unix # alias net-pf-2 off # IPv4 # alias net-pf-3 off # Amateur Radio AX.25 # alias net-pf-4 off # IPX # alias net-pf-5 off # DDP / appletalk # alias net-pf-6 off # Amateur Radio NET/ROM # alias net-pf-9 off # X.25 # alias net-pf-10 off # IPv6 # alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP # alias net-pf-19 off # Acorn Econet alias char-major-10-175 agpgart alias char-major-10-200 tun alias char-major-81 bttv alias char-major-108 ppp_generic alias /dev/ppp ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate # Crypto modules (see http://www.kerneli.org/) alias loop-xfer-gen-0 loop_gen alias loop-xfer-3 loop_fish2 alias loop-xfer-gen-10 loop_gen alias cipher-2 des alias cipher-3 fish2 alias cipher-4 blowfish alias cipher-6 idea alias cipher-7 serp6f alias cipher-8 mars6 alias cipher-11 rc62 alias cipher-15 dfc2 alias cipher-16 rijndael alias cipher-17 rc5 # Support for i2c and lm_sensors alias char-major-89 i2c-dev # Old nvidia support ... alias char-major-195 NVdriver alias /dev/nvidiactl char-major-195 ### modules-update: end processing /etc/modules.d/aliases ### modules-update: start processing /etc/modules.d/alsa # Alsa 0.9.X kernel modules' configuration file. # $Header: /var/cvsroot/gentoo-x86/media-sound/alsa-utils/files/alsa-modules.conf-rc,v 1.4 2004/11/16 01:31:22 eradicator Exp $ # ALSA portion alias char-major-116 snd # OSS/Free portion alias char-major-14 soundcore ## ## IMPORTANT: ## You need to customise this section for your specific sound card(s) ## and then run `update-modules' command. ## Read alsa-driver's INSTALL file in /usr/share/doc for more info. ## ## ALSA portion alias snd-card-0 snd-hda-intel ## alias snd-card-1 snd-ens1371 ## OSS/Free portion # alias sound-slot-0 snd-car ## alias sound-slot-1 snd-card-1 ## # OSS/Free portion - card #1 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss ## OSS/Free portion - card #2 ## alias sound-service-1-0 snd-mixer-oss ## alias sound-service-1-3 snd-pcm-oss ## alias sound-service-1-12 snd-pcm-oss alias /dev/mixer snd-mixer-oss alias /dev/dsp snd-pcm-oss alias /dev/midi snd-seq-oss # Set this to the correct number of cards. options snd cards_limit=1 ### modules-update: end processing /etc/modules.d/alsa ### modules-update: start processing /etc/modules.d/i386 alias parport_lowlevel parport_pc alias char-major-10-144 nvram alias binfmt-0064 binfmt_aout alias char-major-10-135 rtc ### modules-update: end processing /etc/modules.d/i386 ### modules-update: start processing /etc/modules.d/ieee80211 # modules.d configuration file for IEEE80211 # Configurable module parameters # ------------------------------ # debug: debug output mask ### modules-update: end processing /etc/modules.d/ieee80211 ### modules-update: start processing /etc/modules.d/ieee80211_crypt # modules.d configuration file for IEEE80211_CRYPT ### modules-update: end processing /etc/modules.d/ieee80211_crypt ### modules-update: start processing /etc/modules.d/ieee80211_crypt_ccmp # modules.d configuration file for IEEE80211_CRYPT_CCMP ### modules-update: end processing /etc/modules.d/ieee80211_crypt_ccmp ### modules-update: start processing /etc/modules.d/ieee80211_crypt_tkip # modules.d configuration file for IEEE80211_CRYPT_TKIP ### modules-update: end processing /etc/modules.d/ieee80211_crypt_tkip ### modules-update: start processing /etc/modules.d/ieee80211_crypt_wep # modules.d configuration file for IEEE80211_CRYPT_WEP ### modules-update: end processing /etc/modules.d/ieee80211_crypt_wep ### modules-update: start processing /etc/modules.d/ipw2200 # modules.d configuration file for IPW2200 # For more information please read: # README.ipw2200 # Configurable module parameters # ------------------------------ # disable: manually disable the radio (default 0 [radio on]) # associate: auto associate when scanning (default on) # auto_create: auto create adhoc network (default on) # led: enable led control on some systems (default 0 off) # debug: debug output mask # channel: channel to limit associate to (default 0 [ANY]) # qos_enable: enable all QoS functionalitis # qos_burst_enable: enable QoS burst mode # qos_no_ack_mask: mask Tx_Queue to no ack # burst_duration_CCK: set CCK burst value # burst_duration_OFDM: set OFDM burst value # mode: network mode (0=BSS,1=IBSS,2=Monitor) # bt_coexist: enable bluetooth coexistence (default off) # hwcrypto: enable hardware crypto (default off) # cmdlog: allocate a ring buffer for logging firmware commands # roaming: enable roaming support (default on) ### modules-update: end processing /etc/modules.d/ipw2200 ### modules-update: start processing /etc/modules.d/nvidia # Nvidia drivers support alias char-major-195 nvidia alias /dev/nvidiactl char-major-195 # To tweak the driver the following options can be used, note that # you should be careful, as it could cause instability!! For more # option see /usr/share/doc/nvidia-kernel-1.0.7667/README.gz # # To enable Side Band Adressing: NVreg_EnableAGPSBA=1 # # To enable Fast Writes: NVreg_EnableAGPFW=1 # # To enable both for instance, uncomment following line: # options nvidia NVreg_EnableAGPSBA=1 NVreg_EnableAGPFW=1 NVreg_FlatPanelMode=1 NVreg_NvAGP=1 NVreg_EnableVia4x=1 ### modules-update: end processing /etc/modules.d/nvidia ### modules-update: start processing /etc/modules.d/sony_acpi options sony_acpi debug=1 ### modules-update: end processing /etc/modules.d/sony_acpi ### modules-update: start processing /etc/modules.d/sonypi options sonypi minor=63 fnkeyinit=1 verbose=1 compat=1 ### modules-update: end processing /etc/modules.d/sonypi